Icom IC-E92D Instruction Manual

68
8
GPS/GPS-A OPERATION
New2001
■ GPS set mode items
D Entering GPS set mode
q Enter “GPS SET MODE” in message/position set mode.
• GPS SET MODE screen is displayed.
w Rotate [DIAL]
†
to select the desired item, and then push
[
](5)
†
.
e Rotate [DIAL]
†
to select the desired value or condition.
r Push [
](5) (or [ ](4)) to return to GPS SET MODE
screen.
t Push [MENU/
] to return to frequency indication.
D GPS SPEED
Selects the data transmission speed for packet operation
from 4800 bps
(default) and 9600 bps.
D FORMAT
Selects the displaying position format from dddºmm.mm´
(default) and dddºmm´ss´´.
D UNITS
Selects display units for distance and elevation from “m” or
“ft/ml.”
(default : m)
D COMPASS DIRECTION
Selects compass indication type from “NORTH REF” (default)
and “SOUTH REF.”
D UTC offset
Sets time difference from UTC (Universal Time Coordinated)
within –12:00 to +12:00 range in 5 min. steps.
(default: 0:00)
GPS SPEED
GPS SPEED
FORMAT
FORMAT
UNITS
UNITS
COMPASS DIR
COMPASS DIR
UTC OFFSET
UTC OFFSET
GPS SET MODE
GPS SET MODE
r
❮MENU screen❯ ➪ ❮MESSAGE/POSITION❯ ➪ ❮GPS SET MODE❯
(Push [MENU/ ]) (Rotate [DIAL]
†
, then push [ ](5)
‡
.)
New
†
[DIAL] ↔ [ ](2)/[ ](8)
‡
[ ](5) ↔ [ ](6)

Icom IC-E92D Specifications

General

Brand	Icom
Model	IC-E92D
Category	Transceiver
Language	English