IMT CMD.CTRL - Engine Start; Stop

Body Quick Guides 106 Section - 15
Operator’s - Manual # 99906363
Engine Start / Stop

Press to initiate Vehicle Functions mode .
Press to initiate Engine Start / Stop
mode.
Use
to navigate to Start or Stop Engine mode.
Press and hold
until you hear the engine START or STOP.
☛
Press and holding the

works the same as a key turning on
Press to return to the Main Menu.
The illustration above shows the Engine Start mode.
The instructions are for both Engine Start and Engine Stop.
or turning off the engine on a vehicle. Press and holding the
will shut-off the engine in the Engine Stop mode.
1.
3.
2.
4.
5.
ENGINE START / STOP
This chart is to be used as a “quick reference” guide only.
It should not be substituted for a thorough review of the manual.
70490137
5