IMT CMD.CTRL - Crane Configuration-Remote Control Type; Crane Configuration-Boom Length Sensor

Vehicle Congurations 60 Section - 8
Operator’s - Manual # 99906363
Crane Conguration—Remote Control Type
From the Main Menu navigate to Vehicle
Conguration.
Navigate to Remote Control Type.
Press

to initiate specic state.
Press to choose:
Joystick
Toggle Switch
Press to return to Main Menu.
Crane Conguration—Boom Length Sensor
From the Main Menu navigate to Vehicle Conguration.
Navigate to Boom Length Sensor.
Press

to initiate specic states.
Press to choose:
No
Yes
Press to return to Main Menu.


