IMT CMD.CTRL - Vehicle Functions Screen-Trans Inhibit Override

Vehicle Functions 30 Section - 7
Operator’s - Manual # 99906363
Vehicle Functions Screen—Trans Inhibit Override
From the Main Menu Navigate to Vehicle Functions
Press

to initiate Vehicle Functions mode.
Press to navigate to Trans Inhibit Override.
Press to turn switch ON or OFF.
Press to return to Main Menu.
☛
Switch in the ON position will allow:
1. Transmission to be shifted out of Park.
Only turn the toggle switch to ON if there is an issue with the Active Controls system.
Only your equipment’s congurations will be displayed.
Trans Inhibit must be congured for this funtion to be available.


Vehicle Functions: Trans Inhibit Override
☛
☛