Body Quick Guides 110 Section - 15
Operator’s - Manual # 99906363
Fault Codes
1. Press
navigate to the Diagnostic Menu. Press
2. Press to navigate to Fault Codes.
3. Press
to initiate the Diagnostic Fault Code preview menu.
4 . Press
to initiate fault states. This state will display:
• 25 most recent codes in chronological order
• DTCØ indicates a power cycle.
• Press and hold
to clear fault log.
FAULT CODES
This chart is to be used as a “quick reference” guide only.
It should not be substituted for a thorough review of the manual.
70490137
9
To Next Page
Loading...
