Introduction 2 Section - 1
Operator’s - Manual # 99906363
Introduction
PURPOSE OF MANUAL
This Operator Manual provides operation and operator instructions.
SCOPE
This manual provides information for use by the equipment operator under the following headings:
1. Safety. Includes important safety information.
2. General. Includes equipment identication.
3. Operation. Includes control functionality and normal equipment operation.
4. Troubleshooting. Includes basic troubleshooting information for the operator.
PARTS AND SERVICE
Contact your local dealer, or IMT Technical Support Team: 800-554-4421 or 641-923-3711 to order
parts, receive service information, or for other assistance.
DISCLAIMER
This manual must not be used to repair your vehicle. Repair information is available by calling IMT
Technical Support Team, 800-554-4421 for this equipment.
All information, illustrations, and specications in this manual are based on the information available at
the time this manual was published. The illustrations used in this manual are intended as representative
reference views only. Because of our continuous product improvement policy, we may modify
information, illustrations, and / or specications to explain and / or exemplify a product, service, or
maintenance improvement. We reserve the right to make any change at any time without notice.
IMT Technical Support
641-923-3711
To Next Page
Loading...
