Crane Fault Codes 146 Section - 21
Operator’s - Manual # 99906363
Crane—Fault Code Denition
CATEGORY DESCRIPTION
0-0
MAY OCCUR DURING NORMAL OPERATION AND EXPLAIN VARIOUS INTERLOCKS.
THE WARNING ICON SHOULD BE OFF
2-1
INDICATE THAT THERE IS A VOLTAGE SUPPLY PROBLEM. THE WARNING ICON ON.
2-2
INDICATE DIFFICULTY WITH THE INPUTS. THE WARNING ICON ON.
2-3
INDICATE THAT THERE IS AN OUTPUT DRIVER PROBLEM. THE WARNING ICON
ON. THESE FAULTS SHALL BE LATCHED AND NORMAL OPERATION PREVENTED
UNTIL POWER IS CYCLED.
2-4
INDICATE A SYSTEM IS NOT CALIBRATED. THE WARNING ICON ON.
2-5
INDICATE THAT A FUNCTION IS PREVENTED DUE TO A CUTOUT. THE WARNING
ICON ON.
6-6
INDICATE THAT THERE IS SYSTEM COMMUNICATION (CANBUS) PROBLEMS. THE
WARNING ICON ON. THESE FAULTS SHALL BE LATCHED AND NORMAL OPERA-
TION PREVENTED UNTIL POWER IS CYCLED.
9-9
INDICATE THAT THERE IS A CONTROLLER PROBLEM. THE WARNING ICON ON.
THESE FAULTS SHALL BE LATCHED AND NORMAL OPERATION PREVENTED UNTIL
POWER IS CYCLED
To Next Page
Loading...
