Inovance IS810N-INT Series - Page 42

IS810N-INT Series Servo System User Manual (Brief) Chapter 2 Product Information
- 42 -
3) Motor Overload Characteristics
Load Ratio (%) Running Time (s) Load Ratio (%) Running Time (s)
120 230 200 10
130 80 210 8.5
140 40 220 7
150 30 230 6
160 20 240 5.5
170 17 250 5
180 15 300 3
190 12 350 2
Figure 2-11 Motor overload curve
The maximum torque of H1 and H4 is 3.5 times the rated torque.
4) Motor Radial and Axial Loads
Figure 2-12 Motor radial and axial load diagram
100 150 200 250
1000
Load ratio (%)
Running time (s)
300
1
10
100
350
Radial load P direction
Axial load A direction
Axial load B direction