CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1 - Page 117
9.6 GREASING THE STRIKER RELEASING MECHANISM
Authorized Personnel: MECHANICS
Note:- The grease on the striker releasing mechanism needs to be checked every 500
releasing cycles.
- Use grease for revolving machine parts, type AREXONS GC 300.
a) Open the turret door.
b) Visually check the lubrication condition of the striker releasing mechanism.
If necessary smear the mechanism (see the arrows) with grease type AREXONS GC
300.
c) Close the turret door.
X
X
X
Points to
be greased
To Next Page
Loading...
