CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1 - Page 23
4.2 CHECK FOR POSSIBLE DAMAGE
X
X
X
On reception of the goods, it is necessary to perform a visual inspection of the packag-
ing and instrument in order to identify any damage sustained during transport and move-
ment.
If the packaging is damaged, immediately send by fax to ITW Test and Instrument Italia
S.r.l. - INSTRON CEAST Division the details of the damage sustained; or, indicate the
damages directly on the transport document and send this via fax to ITW Test and
Instrument Italia S.r.l. - INSTRON CEAST Division.
If the instrument or accessories should be damaged or missing, it is imperative to not
continue with the installation, but to notify ITW Test and Instrument Italia S.r.l. - INSTRON
CEAST Division immediately via fax of the anomaly found, and to agree with the former
the action to be taken.
4.3 STORAGE
Should the instrument need to be stored until a later date, the environment must be the
same as that for work.
If there are any storage requirements that should require special packaging, they must
be requested from ITW Test and Instrument Italia S.r.l. - INSTRON CEAST Division.
4.1.3 WEIGHT OF THE MAIN PARTS
The table below indicates the approximate weight of the CEAST 9340 instruments and
they can help the warehouse personnel or forklift workers in the choise of the hoister or
forklift appropriate.
Instrument Weight [kg]
9340 code 7515.000
(with standard test chamber)
340
9340 code 7516.000
(with environmental test chamber)
400
To Next Page
Loading...
