CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1 - Page 19
The instrument, subject of this manual, must be used only and exclusively to carry out
impact tests on plates, films and tridimensional parts of thermoplastic materials.
All of the operations for preparation of the instrument for carry out tests, and those
performed at the end of the tests (e.g.: specimen replacement, chamber cleaning, etc.),
must be manually performed by the operator.
Maintenance and instrument regulation (e.g.: replace fuses, installation of additional
modules, etc.) must be performed by persons who are qualified mechanics or electri-
cians (see the chapter on maintenance).
The instrument is sent to the customer in two separate parts: turret and test chamber;
the USER must provide for the positioning and assembling of these parts in the labora-
tory, and their connection to the electric/pneumatic facilities.
After 20,000 hours of work, and in any case not longer than 10 years, a complete over-
haul of the apparatus by ITW Test and Instrument Italia S.r.l. - INSTRON CEAST Divi-
sion is necessary in order to continue to use it safely. The cost of overhaul are the
responsibility of the CUSTOMER.
2.2 NORMAL USE CONDITIONS
To Next Page
Loading...
