Instron CEAST 9340 - Modify Password; Clock

Page 60 - CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1
Vid. 1.6.5 - “Clock“
8.5.13 CLOCK
>
YEAR YEAR
YEAR YEAR
YEAR
XXXXXXXX
XXXXXXXX
XXXX
MONTH MONTH
MONTH MONTH
MONTH
XXXX
XXXX
XX
DAYDAY
DAYDAY
DAY
XXXX
XXXX
XX
HOURHOUR
HOURHOUR
HOUR
XXXX
XXXX
XX
MIN.MIN.
MIN.MIN.
MIN.
XXXX
XXXX
XX
SEC.SEC.
SEC.SEC.
SEC.
XXXX
XXXX
XX
APPLYAPPLY
APPLYAPPLY
APPLY
Function used to see the actual clock value and to modify the time and date.
After the modification select the function “Apply” and confirm it using the
ENTER
key to
make the change operative.
Vid. 1.6.4 - “Modify Password“
8.5.12 MODIFY PASSWORD
>
PASSWORD PASSWORD
PASSWORD PASSWORD
PASSWORD
****************
****************
********
REPEAT REPEAT
REPEAT REPEAT
REPEAT
****************
****************
********
Function used to modify the password for the “User” level.
1) “Password”: type a new password.
Letters and numbers, up to 8 characters maximum, can be used.
2) “Repeat”: re-type the same new password as a check.
The new password will be activated after confirmation with the
BACK
key.
Note: the default password installed is: USER.