Instron CEAST 9340 - Input Password

Page 58 - CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1
Vid. 1.6.1 - “Input Password“
8.5.9 INPUT PASSWORD
Password ********Password ********
Password ********Password ********
Password ********
“Password”: allows to type-in the password for different access to the program. After
the input, the program shows the message with the access level.
Press the
BACK
key to return to the “Main Menu” (Vid. 1).
Letters and numbers can be used up to a maximum of 8 characters.
The instrument can work at three different access levels:
• Operator (without Password): can perform tests on the instrument using existing
parameter groups but cannot modify them (the groups can be loaded using the
proper function).
• User (with Password): can perform tests on the instrument using the existing pa-
rameter groups, can access the parameter groups for modification and can modify
the Password using the “Modify Password” function (Vid. 1.6.4).
• Service (with Password): can access to all the menus and functions.
To return to the “Operator” level from the “User” or “Service” levels, type 0 (zero) in the
“Password” field.
>
Note: the program maintains in memory the current password level.
If you switches the instrument off from the “User” level, on the next restart the
firmware remains on the “User” level.
If you want to restart as “Operator” level instead the “User” one, you must change
it before to switch the instrument off.