CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1 - Page 21
2.4 SHIELDS
It is absolutely necessary that the
instrument operates with all of the
shields always closed. The fixed
shields must always be mounted
and permanently blocked.
2.5 RESIDUAL RISKS
The operators pay particular at-
tention to the points indicated in
the figures.
Do not touch the materials
inside the environmental
chamber during tests at
hight/low temperature.
Use thermally insulated
gloves
DANGER OF BURNS
Do not put hands or objects where
indicated by the arrows
DANGER OF CRUSHING
Mobile shield
(doors)
Fixed
shields
Risk of fingers
crushing during
the weights
replacement
DANGER OF
CRUSHING
Risk of weights
falling during the
weights replace-
ment
DANGER OF
INJURY
Pneumatic cylinders of clamping plate
remain pressurized also in case of
power cut off avoiding the clamping
plate lowering
Operator at work station
The operator must always work in
such a manner to have easy access
to the commands, and at the same
time have complete visibility of the
instrument.
3. OPERATOR WORK STATION
To Next Page
Loading...
