Instron CEAST 9340 - Page 157

CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1 - Page 157
BIAXIAL IMPACT TESTING - RIGID SPECIMENS
a) for striker code 7519.694 only; b) one head dia. 12,7 mm, code 7529.801 included; c) one head dia. 12,7 mm, code 7529.802 included
.
INTERCHANGEABLE HEAD STRIKER
STANDARD
SPECIMEN
DIMENSIONS
[mm]
HEAD
DIA.
[mm]
CLAMP
INNER
HOLE
[mm]
CLAMPING
SET
FIXED HEAD
STRIKER
STRIKER
HEAD
HEAD
ADAPT.
STRIKER BODY
ISO 6603-1 ISO 6603-2
Square
140r2
Disc
140r2
Thickness
4.0r0.1
10 100 7520.044
7519.010 non instrumented 7519.115 strain gauge 10kN
- -
-
ASTM D 3763 ASTM D 5628
method FD
12.7
7519.020 non instrumented 7519.125 strain gauge 10kN 7519.221 piezo 0.45 kN
7529.801(a)
7529.802
-
ASTM D 5628
method FA
 89
-
15.86
(5/8”)
76 7520.043
- 7529.803 -
7519.001 non instrumented 7519.504 strain gauge 5 kN (12.7 mm) 7519.505 strain gauge 10 kN (12.7 mm) 7519.694 piezo 4.5 kN (b) (12.7 mm) 7519.696 piezo 22 kN (c) (12.7 mm)
ISO 6603-1 ISO 6603-2
ASTM D 5628
method FE
Square
60r2
Disc
60r2
Thickness
2.0r0.1
20 40 7520.042
7519.040 non instrumented 7519.146 strain gauge 20kN 7519.241 piezo 0.45 kN 7519.246 piezo 22 kN
7529.804 7529.894
ASTM D 5628
method FB
 51
-
12.7
conical
38.1 7520.041 - 7529.840 7529.896
ASTM D 5628
method FC
140
-
38.1 127 7520.046 - 7529.807 7529.897
7519.001 non instrumented 7519.504 strain gauge 5 kN (12.7 mm) 7519.505 strain gauge 10 kN (12.7 mm) 7519.506 strain gauge 20 kN 7519.507 strain gauge 40 kN 7519.694 piezo 4.5 kN (12.7 mm) 7519.606 piezo 22 kN 7519.696 piezo 22 kN (12.7 mm)