3 Basic Operation of ECDIS 3-146
[View Navtex]: Left-click the log that is including "Event-Navtex" , and then left-click to open
the “Letter” panel that shows the detailed information on the Navtex
messages.
You can mark it if you select [Marking on the Chart]. You can set expiration
date then. When [Expire Date] is off, a marking is deleted after the reception
15 days later.
It changes to the data which the information on the "Letter" panel selected
when selecting another Navtex in "Logbook" panel as it opened a panel
and clicking
[Letter].
[Marking on the Chart]: It displays Navtex symbol on the chart when making valid.
[Expire Date]: [Expire Date] entry field and the note become valid when making valid.
Navtex symbol becomes hidden when passing an [Expire Date]
In case of invalid, the symbol becomes hidden when passing on the 15
days from the date of receive.
In the date of reception, the date in front can not be entered.
Also, more than 15 days after date, too, can not be entered from the date
of reception.
[Edit]: Navtex "Location" panel is displayed.
[Print]: When setting a printer, the Navtex information can be printed.
[Close]: “Letter” panel is closes.
[View REF Point]: Left-click the log that is including “Event-Reference Point” , and then
left-click this button to open the “Information” panel that shows the
detailed information on the Reference Point messages.The following
contents are displayed when selecting “Event-Reference Point” and
clicking
[View REF Point].
・LAT
・LON
・Min Scale
・Max Scale
・Plot Type
・Source
・Time
・Comment
To Next Page
Loading...
