4 Route Planning
4-49
ECDIS
How to edit in the Graphic Editing Menu -- Continued:
Displaying/Modifying information of WPT or leg:
1) Left-click the [Property] button.
2) Left-click the WPT.
When “WPT” is selected, [Edit Waypoint] panel opens, while [Edit leg 1] panel
opens when “Leg” is selected.
Enter the value if you want to change. You can enter a name for the WPT. If
you want to return each value to the default value, left-click the [Default]
button. (The default value is set in the “Route Plan Option” panel. See 4.1.1
“Setting the Route Options”.) After setting, left-click the [OK] button to close
the panel.
[Information for WPT.]
[Information for Leg.]
To Next Page
Loading...
