JRC JAN-701B - Page 479

9
Reference
9-63
ECDIS
Set value list when starting ECDIS - Setting Menu (continued)
No. Category Contents Set when starting
40 AIS Sentence - VDM1 -
41 AIS Sentence - TTD1 -
42 AIS Sentence - TTD2 -
43 Display TT Vector The value when ending last time
44 AIS/TT Past Position The value when ending last time
45 Target Number - AIS The value when ending last time
46 Target Number - TT The value when ending last time
47 AIS Filter - Ring (ON/OFF) The value when ending last time
48 AIS Filter - Ring (Range) The value when ending last time
49 AIS Filter - Sector (ON/OFF) The value when ending last time
50 AIS Filter - Sector (Angle) The value when ending last time
51 Filter Mode The value when ending last time
52 Filter Display The value when ending last time
53 CPA The value when ending last time
54 TCPA The value when ending last time
55 AIS Lost Alarm The value when ending last time
56
AIS/TT Setting
AIS CPA/TCPA Alarm The value when ending last time
57 Association The value when ending last time
58 Synchronized with TTD The value when ending last time
59 Priority The value when ending last time
60 Bearing The value when ending last time
61 Range The value when ending last time
62 Course The value when ending last time
63
AIS/TT
Association Setting
Speed The value when ending last time
64
Start (Normal）
To Waypoint The value when ending last time
65 To Waypoint The value when ending last time
66 Pre Run Speed Value of STW
67 Pre Run Time The value when ending last time
68 Enter Angle The value when ending last time
69 Turn Rate The value when ending last time
70 Pre Run Distance The value when ending last time
71
Start (TCS)
XTD MAX The value when ending last time
72 Setting (Type 1) Turning Gain The value when ending last time
73 XTD MAX The value when ending last time
74 Drift Correction The value when ending last time
75
Dead Band （ON/OFF）
The value when ending last time
76 Dead Band The value when ending last time
77
Setting (Type 2)
Auto Stop The value when ending last time
78 Track Gain The value when ending last time
79 Drift Correction The value when ending last time
80
Dead Band （ON/OFF）
The value when ending last time
81
Auto Sail
Setting (Type 3)
Dead Band The value when ending last time