Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

BOOTPD_DUP_REV
System Log Message Duplicate revision: major-version.minor-version
Description As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. There was more than one definition in the file for the
indicated revision of a component, so tnp.bootpd used the first definition it found.
Type Event: This message reports an event, not an error
Severity notice
Facility ANY
Action Remove the extra definitions from the configuration file.
BOOTPD_DUP_SLOT
System Log Message Duplicate slot default: slot
Description As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. There was more than one definition in the file for the
indicated slot (combination of component assembly ID and revision), so tnp.bootpd
used the first definition it found.
Type Event: This message reports an event, not an error
Severity notice
Facility ANY
Action Remove the extra definitions from the configuration file.
BOOTPD_HWDB_ERROR
System Log Message Operation in chassis hardware database failed: error-message
Description The boot parameter process (tnp.bootpd) could not complete an operation in the
hardware database maintained by the chassis process (chassisd), for the indicated
reason.
Type Error: An error occurred
Severity error
Facility ANY
BOOTPD_MODEL_CHK
System Log Message Unexpected ID 0xidentifier for model model
125Copyright © 2010, Juniper Networks, Inc.
Chapter 16: BOOTPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English