Description As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). A request failed because it included the
indicated assembly ID, which is inconsistent with the routing platform's model number.
Type Error: An error occurred
Severity warning
Facility ANY
Action Contact your technical support representative.
BOOTPD_MODEL_ERR
System Log Message Unsupported model model, assuming M40 defaults
Description As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. A request included a model number for which there
was no definition in the configuration file, so tnp.bootpd provided the boot string
appropriate for an M40 router.
Type Error: An error occurred
Severity warning
Facility ANY
Action Contact your technical support representative.
BOOTPD_NEW_CONF
System Log Message New configuration installed
Description The boot parameter process (tnp.bootpd) loaded a new configuration file.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
BOOTPD_NO_BOOTSTRING
System Log Message No boot string found for type board-type major-version.minor-version command-type
Description As each hardware component on the routing platform initializes, it requests a boot string
from the boot parameter process (tnp.bootpd). The boot strings are defined in the
configuration file for tnp.bootpd. The file did not include a boot string for the hardware
component with the indicated characteristics.
Type Error: An error occurred
Severity warning
Facility ANY
Copyright © 2010, Juniper Networks, Inc.126
Junos 10.3 System Log Messages Reference
To Next Page
Loading...
Need help?
General
