CHASSISD_CONFIG_CHANGE_IFDEV_DEL
System Log Message Deleting argument1 interface-typesdev-numberargument2 due to configuration change
Description The chassis process (chassisd) deleted the indicated interface devices due to a change
in the configuration.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
CHASSISD_CONFIG_INIT_ERROR
System Log Message Unable to parse configuration; using defaults
Description The chassis process (chassisd) could not parse the configuration and used default values
while initializing.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_CONFIG_WARNING
System Log Message function-name: warning-message, FPC fpc-slot PIC pic-slot
Description The configuration that was specified for the indicated PIC is invalid for that type of PIC.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
CHASSISD_DEVICE_OPEN_ERROR
System Log Message Unable to open device-name device file (errno error-code)
Description The chassis process (chassisd) could not open the device file for the indicated device.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_EXEC_ERROR
System Log Message function-name: error-message
Copyright © 2010, Juniper Networks, Inc.140
Junos 10.3 System Log Messages Reference
To Next Page
Loading...