Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description While trying to commit the rescue configuration, the chassis process (chassisd)
encountered an error.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
CHASSISD_EXISTS
System Log Message chassisd already running; exiting
Description The chassis process (chassisd) exited because it discovered that another chassisd
process is already running.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
CHASSISD_EXISTS_TERM_OTHER
System Log Message Killing existing chassisd and exiting
Description The chassis process (chassisd) discovered that another chassisd process is already
running. It terminated the other process and exited.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
CHASSISD_FAN_FAILURE
System Log Message fru-name in slot fru-slot failed
Description The indicated fan or impeller failed. The chassis process (chassisd) raised an alarm and
increased the speed of the remaining fans (and impellers, if applicable) to full speed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
141Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English