EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 208

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Port Concentrator (FPC) for outgoing transmission, it dropped the indicated number of
cells per second.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FASIC_PIO_READ_ERROR
System Log Message Fchip (CB control-board-slot, ID fchip-id): read error in function-name() for link#link-id
at address address in register register
Description The indicated routine failed with a read error at the indicated address and register for
the indicated F chip and link on the indicated Control Board (CB).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FASIC_PIO_WRITE_ERROR
System Log Message Fchip (CB control-board-slot, ID fchip-id): write error in function-name() for link#link-id
at address address in register register
Description The indicated routine failed with a write error at the indicated address and register for
the indicated F chip and link on the indicated Control Board (CB).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FASIC_PLL_ERROR
System Log Message Fchip (CB control-board-slot, ID fchip-id): unable to lock PLL
Description The chassis process (chassisd) could not lock a phased-lock loop (PLL) for the indicated
F chip on the indicated Control Board (CB).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.144
Junos 10.3 System Log Messages Reference

Table of Contents

Related product manuals