EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 211

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHASSISD_FCHIP_FTOKEN_INIT_ERROR
System Log Message Fchip fchip-id: fchip_ftoken_init() stuck in ftoken loop, addr=address, data=data
Description The chassis process (chassisd) encountered an error while initializing memory at the
indicated address for the indicated F chip.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FCHIP_HSR_ERROR
System Log Message Fchip high-speed receiver (HSR) error: error-message
Description The chassis process (chassisd) detected an error in the high-speed receiver (HSR)
subsystem for the F chip with the indicated characteristics.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FCHIP_HSR_INIT_ERROR
System Log Message HSR: No vectors supplied
Description The chassis process (chassisd) could not initialize the high-speed receiver (HSR)
subsystem for an F chip.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FCHIP_HSR_INIT_LINK_ERR
System Log Message Fchip fchip-id: unable to initialize HSR link link-id
Description The chassis process (chassisd) could not initialize the indicated high-speed receiver
(HSR) link for the indicated F chip.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FCHIP_HSR_RESET_ERROR
System Log Message Fchip fchip-id: hsr_reset error in fchip_init() on link link-id
147Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages

Table of Contents

Related product manuals