Description A high-speed receiver (HSR) reset error occurred during initialization of the indicated F
chip and link.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FCHIP_HST_ERROR
System Log Message Fchip high-speed transmitter (HST) error: error-message
Description The chassis process (chassisd) detected an error in the high-speed transmitter (HST)
subsystem for the F chip with the indicated characteristics.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FCHIP_HST_INIT_ERROR
System Log Message HST: No vectors supplied
Description The chassis process (chassisd) could not initialize the high-speed transmitter (HST)
subsystem for an F chip.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FCHIP_HST_INIT_LINK_ERR
System Log Message Fchip fchip-id: unable to initialize HST link link-id
Description The chassis process (chassisd) could not initialize the indicated high-speed transmitter
(HST) link for the indicated F chip.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_FCHIP_HST_RESET_ERROR
System Log Message Fchip fchip-id: hst_reset error in fchip_init() on link link-id
Description A high-speed transmitter (HST) reset error occurred during initialization of the indicated
F chip and link.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.148
Junos 10.3 System Log Messages Reference
To Next Page
Loading...