EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Action Contact your technical support representative.
CHASSISD_FM_ERROR_SIB_L_FB_HSR
System Log Message FM: HSR error occurred on link from SIB-S port F(s-row,s-port) to SIB-L#sib-slot port
F(l-row,l-port)
Description In a routing matrix, packets traverse both electrical and optical media as they travel
between the Switch Interface Boards (SIBs) in the T640 routing nodes (called SIB-Ls)
and the SIBs in the TX Matrix platform (called SIB-Ss). The chassis process (chassisd)
on the routing node that houses the indicated SIB-L detected an error in the electrical
path between the indicated ports on the SIB-L and the corresponding SIB-S.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR_SIB_L_FB_RX_VC
System Log Message error-message on LCC lcc SIB_Lfrom-lcc-sib_FBfiber-bundle VCSEL vcsel Channel
vcsel-channel connected to F13SIBto-sfc-sib
Description In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the routing node that houses the indicated ST-SIB-L
detected the indicated error as packets that were traveling in the optical media.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR_SIB_L_FB_SMF
System Log Message FM: error-message error occurred on link to-from-sib SIB-L#sib-slot to-from-scc SCC
Description In a routing matrix, packets traverse both electrical and optical media as they travel
between the Switch Interface Boards (SIBs) in the TX Matrix platform (the switch-card
chassis, or SCC) and the SIBs in the T640 routing nodes (called SIB-Ls). The chassis
process (chassisd) on the routing node that houses the indicated SIB-L detected the
indicated error as packets that were traveling in the indicated direction were translated
between electrical and optical media.
Type Error: An error occurred
Severity error
157Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages

Table of Contents

Related product manuals