Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR_SIB_S_FB_HSR
System Log Message FM: HSR error occurred on link from LCClcc SIB-L port F(l-row,l-port) to SIB-S#sib-slot
port F(s-row,s-port)
Description In a routing matrix, packets traverse both electrical and optical media as they travel
between the Switch Interface Boards (SIBs) in the TX Matrix platform (called SIB-Ss)
and the SIBs in the T640 routing nodes (called SIB-Ls). The chassis process (chassisd)
on the TX Matrix platform detected an error in the electrical path between the indicated
port on the indicated SIB-S and the indicated port on a SIB-L installed in the indicated
routing node (line-card chassis, or LCC).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR_SIB_S_FB_SMF
System Log Message FM: error-message error occurred on link to-from-sib-s SIB-S#sib-slot to-from-lcc LCClcc
Description In a routing matrix, packets traverse both electrical and optical media as they travel
between the Switch Interface Boards (SIBs) in the TX Matrix platform (called SIB-Ss)
and the SIBs in the T640 routing nodes (line-card chassis, or LCCs). The chassis process
(chassisd) on the TX Matrix platform detected the indicated error as packets that were
traveling to or from the indicated LCC were translated between electrical and optical
media.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_MEMORY_ERROR
System Log Message function-name: unable to allocate memory; error-message
Description The chassis process (chassisd) could not allocate memory for a fabric operation.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.160
Junos 10.3 System Log Messages Reference