EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 225

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Severity warning
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_SIB_ERROR
System Log Message Fabric management error for SIB sib-slot: error-message
Description The chassis process (chassisd) detected the indicated type of error on the indicated
Switch Interface Board (SIB) and performed the indicated action.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_SIB_FPC_TYPE_ERROR
System Log Message SIB sib-slot does not support features required for FPC Type 4
Description The indicated Switch Interface Board (SIB) does not support features required by the
Flexible PIC Concentrator (FPC) Type 4.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FPC_NOT_FOUND
System Log Message function-name: unable to find FPC for PIC attachment operation
Description The chassis process (chassisd) attempted to bring a PIC online, but could not find the
Flexible PIC Concentrator (FPC) that houses it.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FPC_PIC_DETECT_TIMEOUT
System Log Message function-name: PIC detection on FPC fpc-slot timed out
161Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages

Table of Contents

Related product manuals