Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Action Increase cooling in the area around the chassis.
CHASSISD_HOST_TEMP_READ
System Log Message Error reading host temperature sensor
Description The chassis process (chassisd) could not read the temperature sensors on the routing
platform.
Type Error: An error occurred
Severity notice
Facility LOG_DAEMON
CHASSISD_HSR_CONFIG_READ_ERROR
System Log Message function-name: unable to read configuration for HSR identifier
Description The indicated function could not read the configuration for the indicated high-speed
receiver (HSR).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_HSR_CONFIG_WRITE_ERROR
System Log Message function-name: unable to write configuration for HSR identifier
Description The indicated routine could not write to the configuration for the indicated high-speed
receiver (HSR).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_HSR_ELEMENTS_ERROR
System Log Message Provided number of HSR elements (count) was invalid
Description The indicated routine for processing a certain number of high-speed receiver (HSR)
elements failed, because the supplied number of elements was invalid.
Type Error: An error occurred
Severity error
169Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages
To Next Page
Loading...