Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_I2C_GENERIC_ERROR
System Log Message function-name: error-message
Description The indicated error occurred during an I2C access library operation.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_I2C_INVALID_ASSEMBLY_ID
System Log Message '0xassembly-id' is invalid value for fru-name assembly ID
Description The assembly ID for the indicated component (field-replaceable unit, or FRU) was not
valid for its type.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_I2C_IOCTL_FAILURE
System Log Message function-name: operation ioctl failure for group group-id at address 0xaddress (errno
error-code)
Description The chassis process (chassisd) could not perform the indicated ioctl() operation on the
I2C data for the indicated component (field-replaceable unit, or FRU).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_I2C_IO_FAILURE
System Log Message function-name: fru-name operation failed for group group-id at address 0xaddress
171Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages
To Next Page
Loading...