Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The chassis process (chassisd) received the SIGTERM signal, indicating that it should
terminate. It began the procedure for clean shutdown and exit, but possibly restarted
automatically after exiting.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
CHASSISD_TIMER_CLR_ERR
System Log Message function-name: message
Description The chassis process (chassisd) could not clear the state of the timer it had set to track
the timeout period for an event.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_TIMER_ERR
System Log Message Unable to schedule timeout for description
Description The chassis process (chassisd) could not start a timer to track the timeout period for the
indicated event. The seriousness of this error depends on the event.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_TIMER_VAL_ERR
System Log Message Null timer ID
Description The chassis process (chassisd) started a timer to track the timeout period for an event.
The timer returned a null identifier, so the chassisd process could not clear the timer.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_UNEXPECTED_EXIT
System Log Message evMainLoop returned return-value (errno error-code)
Description The chassis process (chassisd) exited unexpectedly and reported the indicated error.
207Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English