Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_UNEXPECTED_VALUE
System Log Message function-name: 'value' is invalid value for object-name
Description The indicated value was specified for the indicated object in a message received by the
chassis process (chassisd). The value is invalid for that type of object.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_UNSUPPORTED_FPC
System Log Message FPC with I2C ID of 0xi2c-id is not supported
Description A Flexible PIC Concentrator (FPC) of the indicated type was installed in the routing
platform. The software does not support that FPC type on this platform.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_UNSUPPORTED_MODEL
System Log Message Model model unsupported with this version of chassisd
Description The version of the chassis process (chassisd) software that is installed on the routing
platform does not support this type of chassis.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_UNSUPPORTED_PIC
System Log Message PIC pic-slot in FPC fpc-slot (type pic-type, version version) is not supported
Copyright © 2010, Juniper Networks, Inc.208
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English