Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Correct the configuration so that the multilink class setting in the fragmentation map
does not exceed the class limit for the interface.
COSD_NULL_INPUT_ARGUMENT
System Log Message NULL input argument : error-message
Description The pointer that was passed to this function was NULL.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
COSD_OUT_OF_DEDICATED_QUEUES
System Log Message Queue usage count for interface interface-name is at percentage-value percent
Description The class-of-service (CoS) process (cosd) is running out of dedicated queues.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
COSD_RATE_LIMIT_INVALID
System Log Message Unable to apply scheduler map scheduler-map to interface interface-name because it
does not support either configured number of rate limiting queues or rate limited queue
priority or rate limited queues and buffer size
Description The class-of-service (CoS) process (cosd) did not apply the indicated scheduler map
to the indicated interface, because the number of rate limited queues in the scheduler
map exceeded the limit supported by this interface or the priority is not supported. The
interface is housed in a type of PIC that does not support the number of configured rate
limited queues or the priority is not supported. In terms of configuration, the 'rate-limit'
statement is included in the scheduler definition at the [edit class-of-service schedulers
<schedul
er-name>
transmit-r
at
e
<ra
t
e>
|
percent
<per
cent
age>]
hier
archy
l
evel.
The
scheduler is included in the scheduler map applied to the interface.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
221Copyright © 2010, Juniper Networks, Inc.
Chapter 20: COSD System Log Messages
To Next Page
Loading...
Need help?
General
