Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

output shaping rate should be configured on the interface. Since no output shaping rate
is configured, the transmit rate or shaping rate of the parent interface will be used instead.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Configure output shaping rate for the indicataed interface
COSD_SCHEDULER_MAP_CONFLICT
System Log Message Forwarding classes "first-forwarding-class" and "second-forwarding-class" in scheduler
map scheduler-map both map to queue queue-number
Description Both of the indicated forwarding classes, which are defined in the indicated scheduler
map, map to the same indicated queue. The double mapping is invalid.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Map only one forwarding class to the queue.
COSD_SCHED_AVG_CONST_UNSUPPORTED
System Log Message Averaging constant not supported on interface interface-name. Value set in scheduler-map
scheduler-map (scheduler name) will be ignored.
Description Configuring averaging constant is not supported on the indicated interface. Value set in
the indicated scheduler will be ignored.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Remove the averaging-constant configuration from the indicated scheduler.
COSD_SCHED_MAP_GROUP_CONFLICT
System Log Message Interface interface-name cannot be bound to scheduler-map scheduler-map. It will be
bound to default scheduler-map
Description Interfaces belonging to a group cannot be bound to different scheduler maps. They will
be bound to the default scheduler map.
Type Error: An error occurred
Severity error
223Copyright © 2010, Juniper Networks, Inc.
Chapter 20: COSD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English