Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

RPD_AMT_TUNNEL_CREATE
System Log Message Tunnel created between gateway destination-address port destination-port relay
source-address port source-port on interface interface-name at time
Description AMT tunnel create event.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
RPD_AMT_TUNNEL_DELETE
System Log Message Tunnel deleted between gateway destination-address port destination-port relay
source-address port source-port on interface interface-name at time
Description AMT tunnel delete event.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
RPD_ASSERT
System Log Message Assertion failed executable-name[pid]: file "source-filename", line line-number: "message"
Description The source code for the routing protocol process (rpd) includes internal self-consistency
checks. A check failed at the indicated line number in the indicated source file, causing
the instance of rpd that was using the indicated binary and had the indicated process ID
(PID) to terminate. The process created a diagnostic core dump for analysis by technical
support personnel.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Examine the messages that immediately follow this message in the system log for
information about possible causes. Contact a technical support representative, and be
ready to provide the list of messages and the diagnostic core dump, if requested.
RPD_ASSERT_SOFT
System Log Message Soft assertion failed executable-name[pid]: file "source-filename", line line-number:
"message", daemon continued running
Description The source code for the routing protocol process (rpd) includes internal self-consistency
checks. A check failed at the indicated line number in the indicated source file, but the
Copyright © 2010, Juniper Networks, Inc.500
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English