Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The routing protocol process (rpd) attempted to modify the state for a logical interface
that is related to circuit cross-connect (CCC), but the request failed.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
Cause It is possible that the kernel lacked the resources to fulfill the request. The rpd process
will recover.
RPD_KRT_DELETED_RTT
System Log Message task-name: received deleted routing table from the kernel for family address-family-type
table ID table-id
Description The routing protocol process (rpd) received a message from the kernel that referred to
a routing table that no longer exists.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_KRT_IFA_GENERATION
System Log Message ifa generation mismatch -- rpd rpd-generation kernel kernel-generation
Description The routing protocol process (rpd) received a message from the kernel in which the
interface address associated with the indicated numerical index differed from the
address-to-index mapping maintained by rpd.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
Cause It is possible that rpd discarded some interface messages from the kernel without
processing them because it received more messages than it could handle. It will recover.
RPD_KRT_IFDCHANGE
System Log Message task-name CHANGE for ifd interface-device-index address/prefix-length failed, error
"error-message"
Description The routing protocol process (rpd) sent a request to the kernel to change the state of
the indicated interface. The request failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
515Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English