Cause It is possible that the kernel lacked the resources to fulfill the request. The rpd process
will recover.
RPD_KRT_IFDEST_GET
System Log Message task-name IFDEST GET for ifd rpd-interface-name failed, error "error-message"
Description The routing protocol process (rpd) requested state information about the indicated
interface from the kernel. The request failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause It is possible that the kernel lacked the resources to fulfill the request. The rpd process
will recover.
RPD_KRT_IFDGET
System Log Message task-name GET index for ifd interface-name failed, error "error-message"
Description The routing protocol process (rpd) requested state information about the indicated
interface from the kernel. The request failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause It is possible that the kernel lacked the resources to fulfill the request. The rpd process
will recover.
RPD_KRT_IFD_CELL_RELAY_INV_MODE
System Log Message Invalid mode (mode) specified for interface device interface-name; defaulting to port
mode
Description The routing protocol process (rpd) received a message from the kernel that specified
the cell-relay encapsulation for the indicated physical interface, but the specified cell-relay
mode (port, or trunk user-to-network interface [UNI], or trunk network-to-network
interface [NNI]) was invalid.
Type Error: An error occurred
Severity notice
Facility LOG_DAEMON
RPD_KRT_IFD_CELL_RELAY_NO_MODE
System Log Message No mode specified for interface device interface-name; defaulting to port mode
Copyright © 2010, Juniper Networks, Inc.516
Junos 10.3 System Log Messages Reference
To Next Page
Loading...