Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_MPLS_LSP_UP
System Log Message MPLS LSP lsp-name up on path-type(pathname) Route lsp-rro lsp bandwidth bandwidth
bps
Description The indicated Multiprotocol Label Switching (MPLS) label-switched path (LSP) came
up and could be used to send traffic.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_MPLS_OAM_LSP_PING_REPLY_ERR
System Log Message Received ping reply with an error: error-code.
Description Received a LSP ping reply with an error code, for the ping request sent. If any failure action
is configured, the failure action will get executed
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
RPD_MPLS_OAM_PING_REPLY_TIMEOUT
System Log Message LSP ping reply timed out
Description LSP ping timed out waiting for a reply. If any failure action is configured, the failure action
will get executed
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
RPD_MPLS_OAM_READ_ERROR
System Log Message Unable to read from pipe to MPLS OAM process: reason (error-message)
Description The routing protocol process (rpd) could not read a message available on the read pipe
from the MPLS Operation, Administration, and Maintenance process (mplsoamd).
Type Error: An error occurred
Severity info
Facility LOG_DAEMON
539Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English