Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility LOG_DAEMON
RPD_MSDP_PEER_UP
System Log Message MSDP peer peer-address peer-group peer-group into Established state
Description The indicated MSDP peer entered the Established state.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
RPD_MSDP_SRC_ACTIVE_OVER_LIMIT
System Log Message Number of MSDP source-active messages about originator exceeded configured limit
message
Description The number of MSDP source-active messages received from the indicated instance,
peer, or source exceeded the configured limit. All source-active messages are discarded
until the limit is no longer exceeded. During periods when the event reported by this
message occurs frequently, the routing protocol process (rpd) does not log every
occurrence. In this case, the repetitions field in the message indicates how many times
the event occurred since the rpd process previously logged this message.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_MSDP_SRC_ACTIVE_OVER_THRESH
System Log Message Number of MSDP source-active messages about originator exceeded configured threshold
message
Description The number of MSDP source-active messages received from the indicated instance,
peer, or source exceeded the configured threshold. Until the threshold is no longer
exceeded, a random early discard (RED) profile is applied to incoming messages so that
only some of them are accepted. During periods when the event reported by this message
occurs frequently, the routing protocol process (rpd) does not log every occurrence. In
this case, the repetitions field in the message indicates how many times the event occurred
since the rpd process previously logged this message.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_MSDP_SRC_ACTIVE_UNDER_LIMIT
System Log Message Number of MSDP source-active messages about originator no longer exceeded configured
limit message
543Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English