Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The number of MSDP source-active messages received from the indicated instance,
peer, or source no longer exceeded the configured limit. Active-source messages are no
longer discarded automatically. During periods when the event reported by this message
occurs frequently, the routing protocol process (rpd) does not log every occurrence. In
this case, the repetitions field in the message indicates how many times the event occurred
since the rpd process previously logged this message.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_MSDP_SRC_ACTIVE_UNDER_THRESH
System Log Message Number of MSDP source-active messages about originator no longer exceeded configured
threshold message
Description The number of MSDP source-active messages received from the indicated instance,
peer, or source no longer exceeded the configured threshold. A random early discard
(RED) profile is no longer applied to incoming messages. During periods when the event
reported by this message occurs frequently, the routing protocol process (rpd) does not
log every occurrence. In this case, the repetitions field in the message indicates how many
times the event occurred since the rpd process previously logged this message.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_MVPN_CFG_PREFIX_LEN_SHORT
System Log Message MVPN argument: prefix length prefix-length is too short for prefix route-prefix, ignoring
excess host bits
Description The prefix length for MVPN source or group object is too short and the indicated prefix
has a non-zero host portion. Excess host bits will be ignored.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
RPD_OSPF_CFGNBR_P2P
System Log Message Ignored configured neighbors on point-to-point realm realm-name interface
interface-name area area-idi
Description For point-to-point interfaces, OSPF neighbors are learned by using hello messages, so
the implicit configuration of neighbors was ignored for the indicated point-to-point
interface.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.544
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English