EasyManuals Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #609 background imageLoading...
Page #609 background image
Severity warning
Facility LOG_DAEMON
Action Remove the neighbor configuration for the indicated interface.
RPD_OSPF_LDP_SYNC
System Log Message OSPF realm realm-name interface interface-name area area-idi advertised with infinite
metric for duration seconds already due to loss of synchronization with LDP
Description The OSPF protocol lost synchronization with the Label Distribution Protocol (LDP) on
the indicated interface. As a consequence, it began advertising an infinite metric for the
interface and has been doing so for the indicated number of seconds.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Determine why LDP lost synchronization with OSPF.
RPD_OSPF_LSA_MAXIMUM_EXCEEDED
System Log Message OSPF realm realm-name number of non-local LSAs exceeded maximum limit
Description The number of non self-generated LSAs exceeded maximum limit specified for database
protection in the indicated realm. Consequently, all non self-generated LSA were deleted
and all neighbors were killed. The router will not send any OSPF hellos and will ignore
any incoming OSPF packets till ignore-time has elapsed.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_OSPF_LSA_WARNING_EXCEEDED
System Log Message OSPF realm realm-name number of non-local LSAs exceeded warning limit
Description The number of non self-generated LSAs exceeded warning limit specified for database
protection in the indicated realm.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_OSPF_NBRDOWN
System Log Message OSPF neighbor neighbor-address (realm realm-name interface-name area area-idi) state
changed from old-state to new-state due to event-name (event reason: reason)
545Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
CategorySoftware
LanguageEnglish

Related product manuals