Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Cause The solicitation message was incorrectly generated.
Action Examine the host that generated the solicitation message.
RPD_RDISC_SOLICITLEN
System Log Message Insufficient length (length) for router solicitation from source-address to
destination-address
Description The routing protocol process (rpd) ignored a router discovery solicitation message from
the indicated router, because the indicated message length is too short.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Cause The solicitation message was incorrectly generated.
Action Examine the host that generated the solicitation message.
RPD_RIP_AUTH_REQUEST
System Log Message Request with invalid authentication from source-address (interface-name)
Description The routing protocol process (rpd) ignored an RIP request because the request
authentication failed.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_RIP_AUTH_UPDATE
System Log Message Update with invalid authentication from source-address (interface-name)
Description The routing protocol process (rpd) ignored a RIP update because authentication of the
update failed.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_RIP_JOIN_BROADCAST
System Log Message Unable to get broadcast address on interface-name; using the all-ones address
Description RIP cannot run on the indicated interface because the routing protocol process (rpd)
could not obtain the broadcast address on the interface as required for running RIP version
1 or version 2 in compatibility mode.
Copyright © 2010, Juniper Networks, Inc.554
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English