Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

RPD_SNMP_INVALID_SOCKET
System Log Message function-name: socket file-descriptor is invalid
Description The routing protocol process (rpd) could not send a message to a Simple Network
Management Protocol (SNMP) master agent because the indicated socket is invalid.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_SNMP_SOCKOPT_BLOCK
System Log Message function-name: unable to set nonblocking option
Description The routing protocol process (rpd) could not set a socket to nonblocking mode after
connecting to the Simple Network Management Protocol (SNMP) master agent.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_SNMP_SOCKOPT_RECVBUF
System Log Message function-name: unable to set recvbuf option
Description The routing protocol process (rpd) could not set the size of the kernel receive buffer,
which allows it to accept the largest possible packet from the Simple Network
Management Protocol (SNMP) master agent.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_SNMP_SOCKOPT_SENDBUF
System Log Message function-name: unable to set sendbf option
Description The routing protocol process (rpd) could not set the size of the kernel send buffer, which
allows it to send the largest possible packet to the Simple Network Management Protocol
(SNMP) master agent.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_START
System Log Message Start executable-name[pid] version version built date
Copyright © 2010, Juniper Networks, Inc.564
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English