Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

SDXD_KEEPALIVES_MISSED
System Log Message No server keepalives received for three intervals
Description The Session and Resource Control (SRC) process (sdxd) and SRC server exchange
keepalive messages at regular intervals. The process did not receive a keepalive from
the server for three consecutive keepalive intervals. In this case, it closes the session and
tries to connect to another SRC server.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
SDXD_KEEPALIVE_SEND_FAIL
System Log Message Unable to send keepalive
Description The Session and Resource Control (SRC) process (sdxd) could not send a keepalive
message to the SRC server, which it does periodically to maintain its connection to the
server.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
Cause There might have been a network problem.
SDXD_MGMT_SOCKET_IO
System Log Message management daemon I/O failure: reason
Description The Service Deployment System process (sdxd) could not read from or write to the
management socket that it uses to communicate with the Junos management process
(mgd).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause The mgd process might have exited abnormally.
SDXD_OUT_OF_MEMORY
System Log Message Insufficient memory during operation
Description The Service Deployment System (sdxd) attempted to allocate memory for an internal
object during the indicated operation. The attempt failed.
Type Error: An error occurred
591Copyright © 2010, Juniper Networks, Inc.
Chapter 79: SDXD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English