Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

UI_COMMIT_SYNC_FORCE
System Log Message All logins to local configuration database were terminated because forced 'commit
synchronize' operation was invoked on other Routing Engine
Description The 'commit synchronize force' command was issued on the other Routing Engine on
the router. All login sessions in the local configuration database were terminated and
the configuration from the other Routing Engine was committed on the local Routing
Engine.
Type Event: This message reports an event, not an error
Severity notice
Facility ANY
UI_CONFIGURATION_ERROR
System Log Message Process: process-name, path: pathname, statement: configuration-statement,
error-message
Description The indicated process found a problem in its configuration.
Type Error: An error occurred
Severity error
Facility ANY
UI_CONFIGURATION_WARNING
System Log Message Process: process-name, path: pathname, statement: configuration-statement,
warning-message
Description The indicated process found a problem in its configuration.
Type Error: An error occurred
Severity warning
Facility ANY
UI_DAEMON_ACCEPT_FAILED
System Log Message connection-type socket connection accept failed: error-message
Description The management process (mgd) did not accept an incoming connection request.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause An internal software failure occurred.
Action Contact your technical support representative.
641Copyright © 2010, Juniper Networks, Inc.
Chapter 88: UI System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English