Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

UI_DAEMON_FORK_FAILED
System Log Message Unable to create session child: error-message
Description The management process (mgd) invokes the fork() system call to create a copy of itself
for each CLI session. The system call failed.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_DAEMON_SELECT_FAILED
System Log Message select failed: error-message
Description The management process (mgd) uses the select() system call to listen for incoming
connection requests on a socket. The system call failed.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_DAEMON_SOCKET_FAILED
System Log Message connection-type socket create failed: error-message
Description The management process (mgd) uses sockets to communicate with other Junos OS
processes running on the routing platform. It could not allocate a socket.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause System resources are exhausted.
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.642
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English