EasyManuals Logo

Kenwood NX-5200K3 Common Function Reference

Kenwood NX-5200K3
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
6.8
Using Voice Guidance (Voice Announcement)
Voice Announcement
is the function to notify the following contents by voice:
0
The selected Zone-channel number when the transceiver is turned ON and the new Zone-channel number when the
Zone-channel is changed (Refer to Zone-Channel Guide.)
0
The function status and transceiver status when the PF key is operated (Refer to Function Guide.)
0
The reception status (Refer to Status Guide.)
0
To use these voice guidance functions, the voice guidance method needs to be configured in Voice Announcement
Type.
Note
0
The audio for Voice Announcement sounds from the speaker of the transceiver. However, if the external speaker is
connected to the transceiver, the audio sounds from the external speaker.
0
The
volume for Voice Announcement is set according to the configuration in Control Tone. Voice Announcement does
not function if “Off” is configured in Control Tone. (Refer to Configuring the Volume Level of Various Tones (Tone
Volume).)
0
Voice Announcement does not function while the transceiver is in Emergency Mode.
0
Voice Announcement does not function if a zone or channel is changed by using the scan function.
0
The received audio does not sound from the speaker while the audio for Voice Announcement sounds.
Configuring Voice Guidance Method (Voice Announcement Type)
Voice Announcement Type
is the function to specify whether to execute various voice guidance by using fixed phrases
or by using audio files arbitrarily configured by a user.
The transceiver behaves as follows according to the configuration in Voice Announcement Type:
Table 6-24 Voice Announcement Type
Configuration Description
None Voice guidance is not executed.
Standard
The Zone-channel number, key function status, and transceiver status are notified by using the
fixed phrase audio.
Voice guidance can be executed in 3 languages configured in Language 1
to Language 3 of
Voice and Display Language. The languages that can be configured in Language 1 to
Language 3 are as follows:
English, Spanish (Spain), Spanish (Latin America), French, German, Italian, Dutch, Russian,
Portuguese (Brazil)
User Programmable
The Zone-channel name, key function status, transceiver status, and received status are notified
by using the audio configured by a user.
Configure the audio to be used by selecting from the audio files registered in Audio Library.
Therefore, the audio files to be used for voice guidance need to be registered in Audio Library
beforehand.
Note
The audio file that can be registered in Audio Library is 8 k 16 bit monaural PCM data within
5
sec. When the total capacity of Audio Library reaches 3 MB, or when the total number of files
reaches 240, no more audio files can be registered. To register a new audio file, a file registered
in Audio Library needs to be deleted.
6 SOUND
6.8 Using Voice Guidance (Voice Announcement)
Common FUNC (K, F)/Ver 2.20 138
CONTENTS INDEX

Table of Contents

Other manuals for Kenwood NX-5200K3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood NX-5200K3 and is the answer not in the manual?

Kenwood NX-5200K3 Specifications

General IconGeneral
BrandKenwood
ModelNX-5200K3
CategoryTransceiver
LanguageEnglish

Related product manuals