Note
0
A
Bluetooth-compatible device registered in the transceiver is displayed in the format of either the Bluetooth device name,
Bluetooth device address, or device class. Pressing the [E] or [F] key can switch the display. (Refer to About the Displayed
Contents of a Bluetooth-compatible Device.)
0
If the Bluetooth device name of a Bluetooth-compatible device registered in the transceiver cannot be acquired, the
Bluetooth device name is displayed as “- - -”.
0
If the transceiver receives an individual call while in Bluetooth My Devices Mode, Bluetooth My Devices Mode ends.
0
Connecting to a Bluetooth-compatible device, or resetting the connection
1
In Bluetooth My Devices Mode, press [ ] or [ ] key to select a Bluetooth-compatible device.
2
Press the Menu ([ ]) or [ ] key.
If a disconnected Bluetooth-compatible device is selected:
A
Key Beep A (1 beep) sounds from the transceiver, and then the screen
to confirm whether to connect appears.
If a connected Bluetooth-compatible device is selected:
A Key Beep A (1 beep) sounds from the transceiver, and then the screen
to confirm whether to reset the connection appears.
3
Press the Menu ([ ]) or [ ] key.
If a disconnected Bluetooth-compatible device is selected:
The connection process by HSP Connection starts. The LED flashes
blue and “Connecting” appears on the display.
12 : 34
A
M
LMIC
C11-100047-HP
Conn Delete
My Devices 1
12 : 34
A
M
Connect?
My Devices 1
OK Back
12 : 34
A
M
Disconnect?
My Devices 1
OK Back
12 : 34
A
M
Connecting
My Devices
1
10 BLUETOOTH COMMUNICATION
10.4 Displaying a Bluetooth-compatible Device (Bluetooth My Devices)
Common FUNC (K, F)/Ver 2.20 194
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
