Kenwood NX-5200K3 Common Function Reference

Function Name Description
Available Communication
Systems
*1
Low Transmit Power
Analog Conventional/ P25 Conventional/ NXDN Conventional:
Selecting
a channel where “High” or “Medium” is configured for the
transmission power, and then positioning the Lever switch to the
position assigned “Low Transmit Power” switches the transmission
power to “Low”.
P25 Trunking/ NXDN Trunking:
Selecting a channel in a system where “High”, “Medium” or “Auto”
is configured for the transmission power and then positioning the
Lever switch to the position assigned “Low Transmit Power”
switches the transmission power to “Low”.
See
Transmit Power
ALL
Monitor
Analog Conventional:
The
transceiver disables the QT tone or DQT code and the Optional
Signaling and unmutes the speaker upon detection of a carrier.
P25 Conventional:
The transceiver disables the NAC and unmutes the speaker upon
detection of a frame.
NXDN Conventional:
The transceiver resets the matching state of RAN code and
Optional Signaling and unmutes the speaker upon detection of an
NXDN frame.
See
0
P25 FUNC Temporarily Disabling the Signaling (Monitor)
0
NXDN FUNC Temporarily Disabling the Signaling (Monitor)
Analog Conventional
P25 Conventional
NXDN Conventional
Scan
Starts or stops scanning.
See
0
NXDN FUNC SCAN
0
P25 FUNC ### Error: NO TOC title. ###
ALL
Scan Normal
Starts a Non-Priority Scan.
See
0
NXDN FUNC SCAN
0
P25 FUNC ### Error: NO TOC title. ###
ALL
Scan Program
Enters Scan Program Mode. The Scan List can be edited in Scan
Program Mode.
See
0
P25 FUNC Changing the Scan List (Scan Program)
0
NXDN FUNC Changing the Scan List (Scan Program)
ALL
Scrambler/Encryption
Toggles the Voice Scrambler/ Encryption between enabled and
disabled.
See
0
P25 FUNC COMMUNICATION SECURITY
0
NXDN FUNC COMMUNICATION SECURITY
Voice Scrambler:
Analog Conventional
Encryption:
P25 Conventional
P25 Trunking
NXDN Conventional
NXDN Trunking
19 CONFIGURATION FOR EACH FUNCTION
19.3 Available Functions for the Selector
Common FUNC (K, F)/Ver 2.20 418
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English