Function Name Description
Available Communication
Systems
*1
Squelch Off
Analog Conventional:
The transceiver opens squelch and unmutes the speaker.
P25 Conventional:
The transceiver disables the NAC and unmutes the speaker upon
detection of a frame.
NXDN Conventional:
The transceiver resets the matching state of RAN code and
Optional Signaling and unmutes the speaker upon detection of an
NXDN frame.
See
0
P25 FUNC Temporarily Disabling the Squelch (Squelch Off)
0
NXDN FUNC Temporarily Disabling the Squelch (Squelch Off)
Analog Conventional
P25 Conventional
NXDN Conventional
Stack
Enters Stack Mode. In Stack Mode, the data stored in the stack
memory
of the transceiver, such as call records, Status Messages
and Short Messages, can be referred or cleared.
See
Viewing the Receive History (Stack)
ALL
Surveillance
Toggles the Surveillance between enabled and disabled. While the
Surveillance function is enabled, the transceiver does not emit a
tone or light the backlight even when the transceiver functions.
ALL
Talk Around
Toggles the Talk Around between enabled and disabled.
See
0
P25 FUNC Communicating Without Using a Repeater (Talk
Around)
0
NXDN FUNC Communicating Without Using a Repeater (Talk
Around)
Analog Conventional
P25 Conventional
NXDN Conventional
Vibrator
Toggles the Vibrator between enabled and disabled.
See
Using the Vibrator
ALL
Zeroize
Deletes all Encryption Key data stored in the SCM.
See
0
P25 FUNC Deleting all Encryption Keys (Zeroize)
0
NXDN FUNC Deleting All Encryption Keys (Zeroize)
P25 Conventional
P25 Trunking
NXDN Conventional
NXDN Trunking
*1
ALL indicates that a function can be used in all the following communication systems:
0
Analog Conventional
0
P25 Conventional
0
P25 Trunking
0
NXDN Conventional
0
NXDN Trunking
0
DMR Conventional
19 CONFIGURATION FOR EACH FUNCTION
19.3 Available Functions for the Selector
Common FUNC (K, F)/Ver 2.20 419
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
